更新时间：2021-01-05 18:54:05
封面
版权信息
内容简介
Preface
01 Chapter 1 Introduction
1.1 Background
1.2 Motivation
1.3 Outline
02 Chapter 2 Study of the filtration performance of multi-fiber filters
2.1 Introduction
2.2 Model of multi-fiber filters
2.3 Filtration efficiency and its optimization
2.4 Conclusion
References
03 Chapter 3 Studyofparticlerebound03anddepositiononfibersurface
3.1 Introduction
3.2 Models of flow field and particle movement
3.3 Particle transport and deposition
3.4 Conclusion
04 Chapter 4 Investigation of the flow-field in the upper respiratory system when wearing N95 FFR
4.1 Introduction
4.2 Modeling of full breathing cycles
4.3 Flow field of a full breathing cycle
4.4 Discussion
4.5 Conclusion
05 Chapter 5 Investigation of water05vapor condensation on the innersurface of N95 FFR
5.1 Introduction
5.2 CFD modeling of water vapor condensation
5.3 Water vapor condensation on the inner surface of N95 FFR
5.4 Discussion
5.5 Conclusion
06 Chapter 6 Effect of vapor06condensation on micro-climatein the deadspace of N95 FFR
6.1 Introduction
6.2 CFD modeling of vapor condensation
6.3 Experiment of micro-climate inside N95 FFR
6.4 Conclusion
07 Chapter 7 Investigationofmovement characteristicsandrespiratorydepositionofindoorcigaretteparticles
7.1 Introduction
7.2 Model of particle movement and respiratory deposition
7.3 Flow field and cigarette particles deposition
7.4 Conclusion
08 Chapter 8 An improved FFR08design with a ventilation fan:CFD simulation and validation
8.1 Introduction
8.2 Improved FFR design and CFD simulation
8.3 Performance of the ventilation fan and its effects
8.4 Conclusion
09 Chapter 9 Design of the FFRwith an intelligent control fan
9.1 Introduction
9.2 Improved FFR design
9.3 Design of intelligent control system
9.4 Test results of FFR performance
9.5 Discussion
9.6 Conclusion
10 Chapter 10 Study of contact10characteristics between a respirator and a headform
10.1 Introduction
10.2 Modelsandmethodsofcontactcharacteristics between a respirator and a headform
10.3 Contact characteristics between a respirator and a headform
10.4 Conclusion
11 Chapter 11 The effects of facialexpressions on respirators fit
11.1 Introduction
11.2 Models and methods of facial expressions
11.3 Effects of facial expressions on respirators fit
11.4 Conclusion
12 Chapter 12 Customized design12and 3D printing of face seal foran N95 FFR
12.1 Introduction
12.2 Design manufacture and test of customized face seals
12.3 Contact characteristics between the FFR and headform
12.4 Discussion
12.5 Conclusion
